Lesson 3 of 5
In Progress

Step 3: Weeding

1: After both sheets are ready, we are going to use our weeding tool, in order to remove all the parts that we are not going to use in our design (the extra material). This tool is critical for this type of project, you are going to use the point of your tool and make a little hole in one of the corners so you can start removing all the excess. 

2: We are going to proceed with the same process now with the white phrase:

3: Once both sections are done, we are going to cut transfer tape with the same dimensions of our physical design and we are going to apply the transfer tape over each one of them, you should have something like

5: Now, we are going to peel the white paper from the back of our word:

Crafty Club Points

You earn points in two ways. The first way is by completing project tutorials.

  • Beginner = 10 Points
  • Intermediate = 15 Points
  • Advanced = 25 Points

Secondly, you earn Points when other Members like your posts or comments. 1 like = 1 Point. This encourages Members to produce quality content and interact with other Members in their community.

As you gain Points, you level up. Your level is shown next to your name and Avatar throughout the website.

  • Level 1 – 0 points
  • Level 2 – 15 points
  • Level 3 – 35 points
  • Level 4 – 70 points
  • Level 5 – 175 points
  • Level 6 – 300 points
  • Level 7 – 500 points
  • Level 8 – 1000 points
  • Level 9 – 1500 points
  • Level 10 – 2000 points