Lesson 3 of 5
In Progress

Step 3: Cutting the Pumpkin Spice Cat parts

Before moving any further, we are going to save our design. To do that:

1- Click on Save link on the top right corner of the Design Space and Add a descriptive name and click on Save Green Button.

2- Now that our project is saved, we need to make sure that our right machine is selected, to that, we click on the link next to the Make Green Button and from the options listed, we choose the one that we are going to use. In our case it is the Maker.

3- Let’s start Cutting our Project!!!!! By clicking on Make Green Button.

4- We are going to see on the next page, that we have 1 cut page per color related to the Pumpkin Spice Cat, in our case 5 Cuts.

5- You need to check the Material Load type and the Material Size. In our scenario, we are using a Light Blue cutting mat 12 x 12. So there is no need to change the configuration.

6- For each one of the colors, we need to activate the Mirror Functionality. In order to do that, we just simply click over the Mirror button button and is going to change from White color, to green color:

💡Tip:  The purpose of the mirror functionality is for iron-on projects and materials that are placed face down like leather and HTV Vinyl.

7  – We are going to click on Continue and in here, we are going to click on “Browse” to be able to choose the material type that we are going to use and start cutting our design, we are going to search the material using the word “iron

💡Tip:  If you do not know how to search the material, please refer to this document

8- Since we are using the same Iron On Vinyl, but different colors, we can keep the same configuration for all the different parts.

9 – We can start cutting. If this is your first time, please check the following document with the steps on how to add your mat to the machine and start cutting. [Reference to the Document with the link to CUT]

10 – After all the cuts are done, we are going to obtain 5 different parts (one related to each color):

Easy press

Crafty Club Points

You earn points in two ways. The first way is by completing project tutorials.

  • Beginner = 10 Points
  • Intermediate = 15 Points
  • Advanced = 25 Points

Secondly, you earn Points when other Members like your posts or comments. 1 like = 1 Point. This encourages Members to produce quality content and interact with other Members in their community.

As you gain Points, you level up. Your level is shown next to your name and Avatar throughout the website.

  • Level 1 – 0 points
  • Level 2 – 15 points
  • Level 3 – 35 points
  • Level 4 – 70 points
  • Level 5 – 175 points
  • Level 6 – 300 points
  • Level 7 – 500 points
  • Level 8 – 1000 points
  • Level 9 – 1500 points
  • Level 10 – 2000 points