1: In order to be able to transfer our design, first we are going to cut a piece of transfer tape with the same size as our design, we are going to remove the back part of the transfer tape and we are going to place it over our design and with our fingers we are going to rub the whole surface so we make sure that our design is going to stick to the transfer tape
2: We are going to remove the design from its original sticker paper making sure that everything was transferred to the transferred tape:
3: Once it was fully removed, we are going to place our transfer tape over our shadow box, and using our fingers or a scrapper we are going to rub gently the whole transfer tape so our design can stick over our shadow box:
4: We are going to start removing the transfer tape very gently and if needed you are going to cut the parts that were transferred:
We are going to apply this process until we remove all the transfer tape.
6: Once you remove the whole transfer tape, your shadow box is READY!
In this tutorial, you are going to learn/practice the following skills:
- Add Images
- Resize Elements
- Duplicate Elements
- Rotate Elements
- Weld Elements
- Align Elements
- Attach elements
- Install and use fonts
- Add and resize text
- Use Permanent vinyl
- Create new elements
- Flip and Curve Elements