1: In order to be able to transfer our design if you do not have any tool to center your design, you can fold your t-shirt by half (vertically)
And the placing the design over the half, something like:
2: Holding the design with one of your hand over the shirt, you can open the T-shirt and finishing placing the design:
3: We are going to turn on our easy press to: Time: 30” T: 315
💡Tip: Make sure to read your materials instructions carefully.
4: We are going to place the teflon sheet, and we are going to start with the heat process:
💡Tip: BE CAREFUL! Teflon sheets and Easy press are very hot!
5: After your pressed the whole design, in our case we have to split it in 4 sections, we are going to wait a couple of minutes (the vinyl that we are using needs to be cold in order to remove it) and we are going to start removing the vinyl protection:
💡Tip: While removing the protection if the vinyl is also being removed, you need to repeat the process with your easy press and heat the material one more time.
6: Once you removed the whole protection, your T-shirt is DONE! You did an amazing job!
In this tutorial, you are going to learn/practice the following skills:
- Add Images
- Resize Elements
- Duplicate Elements
- Rotate Elements
- Weld Elements
- Align Elements
- Attach elements
- Install and use fonts
- Add and resize text
- Use Heat Transfer Vinyl
- Flip and Curve Elements