1: The mat has 4 pockets for you to place the cards, and also has a protective film. We are going to start by removing the film for the 2 sections of the mat, even if you are going to cut 1 card, you need to remove all the protections.
2: Once you remove the protections, we are going to place the cards inside them.
3: After you inserted your cards, you should have something like:
Since we are using a cricut maker, we need to do the following step, please check if this applies to the machine that you are using!
4: Now, we need to move our white wheels from our machine, into the middle so they can run over the middle of our card mat:
Before moving them, you should have something like:
After moving them, you should have the following, you can use your mat, to make sure they are aligned in the center:
5: After your white wheels were moved, we can start the process to cut our design.
In this tutorial, you are going to learn/practice the following functionalities:
- Slice Images/shapes
- Search Images
- Add Shapes and Images
- Upload Images
- Resize Elements
- Add Text and Change Fonts
- Delete Elements
- Create an Offset
- Attach Elements
- Change colors
- Weld Elements
- Insert Cards Mat