1- For infusible Ink, we need to be very careful because the design could transfer to the back part of our sweatshirt. In order to avoid this, we are going to grab a piece of cardboard and a piece of parchment paper and we are going to do the following:
And we are going to place it in the inside of our sweatshirt under the place that we are going to transfer our design:
2- We are going to turn on our Easy press and we are going to set:
Timer: 60 seconds
Temperature: 400 F
3- Now, we are going to start placing our design in the desired place facing the color side down.
4- We are going to transfer the designs in phases so we can ensure that we look at the place that we like.
Before applying the easy press over our design, we are going to place our teflon sheet:
⚠️WARNING: Teflon sheet, and Infusible Ink ARE VERY HOT!
5- We are going to press our design so it transferred, when the timer finished, we are going to remove the teflon sheet by grabbing it with tweezers
After the material was removed we are going to place the rest of the design and press it one more time:
6- As a last step we are going to press our text:
7- After removing all the material for the infusible ink, our Sweatshirt is DONE! You did an amazing job!!!
In this tutorial, you are going to learn/practice the following functionalities:
- Size Images and Shapes.
- How to add the mat to the machine and proceed with the cuts..
- How to use the weeding tool.
- How to use Infusible ink
- How to add text
- How to install fonts
- How to upload images
- How to change font
- How to use an easy press.
